SUPER MINI ELM327 BLUETOOTH V2.1 / V1.5 OBD2 CAR DIAGNOSTIC TOOL
ELM327 V2.1 Features:
- Works on Android/ Symbian/Windows. Please use the Android system V4.1 to V4.3 version. No Support IOS
- Bluetooth Passwords: 1234
- Latest Version SW: V2.1.HW: V2.1.
- This one CAN'T support for Diesel or Trucks and it can't be used on the IOS system.
- The latest SW version supports most of the OBDII protocols.
ELM327 2.1 OBD2 Bluetooth Support 7 Kinds of OBDII protocols as follows:
Vehicle Coverage: Works on all OBD2 Vehicles.
- ISO9141-2(5 baud init,10.4Kbaud)
- ISO14230-4 KWP(5 baud init,10.4 Kbaud)
- ISO14230-4 KWP(fast init,10.4 Kbaud)
- ISO15765-4 CAN(11bit ID,500 Kbaud)
- ISO15765-4 CAN(29bit ID,500 Kbaud)
- ISO15765-4 CAN(11bit ID,250 Kbaud)
- ISO15765-4 CAN(29bit ID,250 Kbaud)
Top 5 Reasons To Get Super MINI ELM327 Bluetooth V1.5:
1. Software Version: V2.1
2. Hardware Version: V1.5
3. Works with all OBD-II compliant vehicles
4. Wireless (Bluetooth)
5. Software included for Palm, PDA, Windows PC, Windows Smartphone
6. 1PCB PIC18F25K80 Chip is 4MHZ. Bluetooth Module is 24MHZ.
2PCB PIC18F25K80 Chip is 4MHZ. Bluetooth Module is 16MHZ.
7. It supports commands ATAL and ATPPS.
8. If you need double PCB with PIC18F25k80 ELM327 V1.5. You can buy it on this link:
This is our one PCB Board With Real PIC18F25K80, HW V1.5, SW V2.1
ELM327 Bluetooth V1.5 Support All 9 Kinds of OBDII protocols as follows:
SAE J1850 PWM (41.6 kbaud)
SAE J1850 VPW (10.4 kbaud)
ISO 9141-2 (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (fast init, 10.4 kbaud)
ISO 15765-4 CAN (11 bit ID, 500 kbaud)
ISO 15765-4 CAN (29 bit ID, 500 kbaud)
ISO 15765-4 CAN (11 bit ID, 250 kbaud)
ISO 15765-4 CAN (29 bit ID, 250 kbaud)
ELM327 V1.5 Specifications:
- Operating voltage: 12V, internal protection from short circuits/overvoltages
- Nominal idle current: 45mA
- Item Size: 3.2 * 4.7 * 2.3cm
- Item Weight: 22g
- Package Weight: 45g
- Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
- Clear trouble codes and turn off the MIL ("Check Engine" light)
- Display current sensor data
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure
- 1pc x ELM327 Bluetooth obd scan tool interface
- 1pc x SW driver
How to connect the Bluetooth 4.0 :
Some customers have feedback that our products will not connect IOS/Android via Bluetooth, please Remember the connection method, because the Bluetooth connection is different from normal Bluetooth.
- Open the Bluetooth first(But please do not connect the product to the Bluetooth page of your phone,this way is wrong)
- Open the software (like AUTO Doctor)
- Open the software's adapter settings page
- Connect Bluetooth in the settings page, then close the software,then reopen again, Everything will be ok
I love the compact size it pairs with torque just fine. It does the job I would expect from an ELM327 device.
Works like a charm! Not complaints! Better than any other OBD Bluetooth I’ve used!
I use it to connect to Dash Command and Torque Pro. It works great, and connects quickly.
Works great better than a more expensive LELink Bluetooth Low Energy BLE OBD-II OBD2 Car Diagnostic Tool For iPhone/iPod/iPad for 35 dollars
Inexpensive and it works.